Professional 6-piece electronic drum set, DM10, RealHead 10” snr, 4x 8″ toms, DMPad HH, 2x Crash, 3-zone Ride

2 Responses to “Alesis DM10 Studio Kit Professional Six-Piece Electronic Drum Set”

1. Jeffrey Kissner says:

   April 30, 2010 at 12:00 am

   I looked forward for the DM10 Studio Kit to become available for months, and even downloaded the manual from Alesis when it became availble so I could hit the ground running when I made my purchase. When the unit showed up on my door step I grabbed the hand truck and axiously moved it to its new home. I opened the box and everything was neatly packed and protected. I began unpacking all of the individual boxes and frame peices and spread them around the room. I located the installation instructions. The instructions for putting the entire unit together was on an 8×11 peice of paper in 4 different languages with the diagrams and printing so small it was difficult to read. I immediately went to the Alesis website and down loaded the instructions so I could easily zoom in on my laptop. Problem 1 solved. The frame was fairly easy to put together and rigid enough to support all drums and accesseries. All of the clamps that hold the frame, cymbal and drums to the frame are plastic and I accidently cracked one by hand tightning. Would have been better to have aluminum clamps. There are no ball joints like you would find on an acoustic set for ajusting the tom drums,as it is an L rod that allows side to side ajustment. The clamp attached to the frame will allow up and down movement but can be tricky to get at once the tom is mounted. I mounted the sound module to the frame with the included clamp and proceded to run the cables to the triggers on the drums and cymbals. All cables were clearly marked as well as the back of the sound module. There were two cables in which the desciption did not match what was written on the back of the sound module, I just plugged them into the next available spaces. The cables are pre-cut to length so you cannot vary the placements of the drums and cymbals. Even when placed like the instructions show there is not a sufficient amount of cable to neatly attach to the frame. I actually had to move the sound module to under the hihat cymbal as to not stress the wires on the back of the sound module.

   The one major design flaw seem to be the base drum module. It is very top heavy and has no support legs on the sides. It wobbles alot while playing, especially on carpet as it actually tipped over. Be careful that you retract the spikes before putting it on hardwood, vinyl or ceramic tile floors. I also could not get much sound out of the base drum pedal. I think it may have been defective as no matter what I did the volume would not increase like I could get the rest of the triggers to do. The hihat pedal felt nothing like a “real hihat pedal” even though thats what Alesis calls it. I could not get it to calibrate and perform as advertised. Do not buy this unit thinking that when you are done putting it together that it is ready to play. This unit needs alot of calibration and adjustment. Plan on spending a couple of hours doing this. The sounds that the module produces are good and the menues are easy to navigate. As far as the drum heads are concerned, Alesis claims in their advertising it is just like playing acoustic drums and no need to change your playing technique. It could not be farther from the truth. The drum heads themselves may be real but thats about it. I do not know what the material directly underneath the head is but it is a hard spongy type material and fairly noisy. I was impressed with the cymbals as they seemed high quality like you would find on a Roland or Yamaha set.

   Like I mentioned earlier I had problems with calibration and getting sound out of the base drum pad. I called Alesis waiting on hold 45 to 60 minutes at a time and giving up. I should not have to wait that long. Just being curious I called Roland and Yamahas customer service departments and had a rep within minutes. After that little experiment, I re-packaged the entire unit and sent it back for a refund. I am now saving up for a Roland or Yamaha unit.
2. Michael Partain says:

   April 25, 2010 at 12:00 am

   For some crazy reason, I decided to start drums. I have a small home studio and play some guitar and getting drum tracks into the music I create has always been a problem. I know I could have gotten a (better?) acoustic kit for the same price, but by the time you add mics to get it recorded, it ends up being more expensive. And with Electronic drums you have an endless array of sounds available and the ability to edit your performance after the fact. So anyhow, for my purposes, this kit seems very good.

   I read a couple of posts on the internet and expected it to take between 45 minutes to an hour to set up. 4 hours later I had a roughly organized initial setup. I had never played drums before and had no idea where I wanted things to be. I ended up having to reverse some mounts to get the drums in the position I think they should be. There is a curved bar for the front top – it was unclear in the very limited setup directions which way this bar should be mounted. I have no idea if I have it correct or not, and it would take another hour to change it if it is wrong. The setup directions need to be a lot better. The supplied wiring seems short in places. If the supplied wiring can only be attached one way, then the directions should show you that one way, and they don’t. The hihat pedal is also not as responsive as I would expect. I have read that the Roland hihat pedal will work with this kit and is a better choice so I probably will get one and use it.

   The other electronic aspect I have not been able to solve yet is that the kit is supposed to be able to use the USB connection to transmit and receive midi. I have yet to get that working on a PC, but I have heard that it works on a mac. Perhaps Alesis is just behind in getting proper PC drivers out for it.

   Other than that, the brains (DM-10) has very good sounds and very good adjust-ability for sensitivity and response.

   The drums themselves play fine. The good news is that there are instruction for mods on the internet that will allow you to convert these to much better drums, for about $12 each. At that point, for $999 + ($12 x5) = $1060 you have the equivalent of some $2500+ electronic kits. As I get a little better with my playing, I plan on making those mods.

   Alesis should really consider splitting package into 2 separate boxes to make shipping easier (via common UPS etc). The problem is a single box weighs 75lbs and that exceeds the UPS limit. Freight shipping was a nightmare. It went through at least 3 different companies, the final which refused to deliver to a residential area with their large trucks. I ended up having to go pick these up myself after paying $160 for shipping. No store within 3 hours drive plans on stocking a kit like this, so shipping was the only option. I still feel ripped off to pay that much for delivery and have to go pick it up myself at the shipping companies convenience.

   Bottom line – Great kit. Good feel, excellent potential. Perfect for my small studio.